NCL WITHSTAND™ Non-Buff Floor Sealer / Finish
VENDOR: NCL
This superior sealer / finish is ideal for areas which receive little to no polishing or buffing. Utilizing MPS77 Advanced Technology, WITHSTAND™ provides a dramatic wet-look gloss from fewer coats, with long term gloss retention. Easy to apply; reduces labor costs. Classified by Underwriters Laboratories® for slip resistance.
Ideal for classrooms or other areas of schools that receive little to no polishing or buffing when classes are in session, September through June.
Authorized UL Product
Features & Benefits
- High Traffic Applicable
- Exceptional wear and durability
- Combination Sealer/Finish reduces product cost
- Maximum scuff and scratch resistance
- Reduces labor costs associated with buffing maintenance
Directions
Floor Preparation: Strip old finish and wax using your preferred NCL floor stripper following label directions. For baseboards and corners, use an NCL baseboard stripper following label directions. If necessary, rinse thoroughly with clean water and allow to completely dry.
Application: Using a clean mop or applicator apply a thin uniform coats of WITHSTAND™ Non-Buff Floor Sealer / Finish. Allow to dry for a minimum of 20 minutes after each coat. Do not apply more than 4 coats in a 24 hour period. Floor should be thoroughly dry before traffic is allowed in area.
High Speed Buffing and Burnishing (if desired): WITHSTAND™ Non-Buff Floor Sealer / Finish is an ideal product for use in areas where minimal or no buffing maintenance can be performed. You may, if desired, maintain this product with High Speed polishing or UHS burnishing equipment (electric, battery or propane). Conventional speed maintenance is not recommended. Prior to buffing or burnishing dust mop the floor surface using an NCL dust mop treatment. Buff or dry burnish using an NCL Aqua Magic buffing pad. For spray buffing, mop-on or autoscubber restoring use a prefered NCL gloss restorer.
Routine Maintenance: Dust mop using mop treated with an NCL dust mop treatment. Damp mop or clean with an automatic scrubber using your preferred NCL neutral floor cleaner following label directions.
Related Products
SKU: genlabs-concrete-film-remover-gal
PRODUCT TYPE: Concrete Film Remover
VENDOR: Genlabs
A fast acting, biodegradable organic acid salts cleaner designed to clean cement, mortar, lime deposits, efflorescence, sanded grout residue, hard water deposits, rust and other heavy accumulated dirt and grime. This product is designed for use on non-polished surfaces like...
SKU: genlabs-lightening-fast-gal
PRODUCT TYPE: Floor Stripper
VENDOR: Genlabs
An extremely fast acting stripper- our strongest stripper produced. Very aggressive for those hard-to-remove floor coatings. NOT FOR USE ON LINOLEUM.
SKU: genlabs-wood-floor-gal
PRODUCT TYPE: Floor Cleaner
VENDOR: Genlabs
Wood Floor Cleaner is specially developed to clean and dissolve dirt, soil and sticky messes on the floor. Dilute 2 ounces of this product with 1 gallon of water to create a solution is very efficient in the cleaning of...
SKU: 24-7-ncl-1
PRODUCT TYPE: Floor Finish
VENDOR: NCL
24/7® is a new, highly advanced floor finish with superior “off-the-mop” initial gloss. This ultra-high solids formula provides exceptional film clarity, repels soil and scratches, and extends the time between stripping cycles from 18 to 36 months. A wet-look gloss...
SKU: ncl-brite-eyes-1
PRODUCT TYPE: Floor Finish
VENDOR: NCL
An instant deep wet look thermoplastic floor finish which can be high speed burnished or maintained with conventional methods. This unique premium grade floor finish is manufactured in high pressure reactors using integrated latex and oligomeric polymer emulsions chemically combined...
