NCL WITHSTAND™ Non-Buff Floor Sealer / Finish
VENDOR: NCL
This superior sealer / finish is ideal for areas which receive little to no polishing or buffing. Utilizing MPS77 Advanced Technology, WITHSTAND™ provides a dramatic wet-look gloss from fewer coats, with long term gloss retention. Easy to apply; reduces labor costs. Classified by Underwriters Laboratories® for slip resistance.
Ideal for classrooms or other areas of schools that receive little to no polishing or buffing when classes are in session, September through June.
Authorized UL Product
Features & Benefits
- High Traffic Applicable
- Exceptional wear and durability
- Combination Sealer/Finish reduces product cost
- Maximum scuff and scratch resistance
- Reduces labor costs associated with buffing maintenance
Directions
Floor Preparation: Strip old finish and wax using your preferred NCL floor stripper following label directions. For baseboards and corners, use an NCL baseboard stripper following label directions. If necessary, rinse thoroughly with clean water and allow to completely dry.
Application: Using a clean mop or applicator apply a thin uniform coats of WITHSTAND™ Non-Buff Floor Sealer / Finish. Allow to dry for a minimum of 20 minutes after each coat. Do not apply more than 4 coats in a 24 hour period. Floor should be thoroughly dry before traffic is allowed in area.
High Speed Buffing and Burnishing (if desired): WITHSTAND™ Non-Buff Floor Sealer / Finish is an ideal product for use in areas where minimal or no buffing maintenance can be performed. You may, if desired, maintain this product with High Speed polishing or UHS burnishing equipment (electric, battery or propane). Conventional speed maintenance is not recommended. Prior to buffing or burnishing dust mop the floor surface using an NCL dust mop treatment. Buff or dry burnish using an NCL Aqua Magic buffing pad. For spray buffing, mop-on or autoscubber restoring use a prefered NCL gloss restorer.
Routine Maintenance: Dust mop using mop treated with an NCL dust mop treatment. Damp mop or clean with an automatic scrubber using your preferred NCL neutral floor cleaner following label directions.
Related Products
SKU: 24-7-ncl-1
PRODUCT TYPE: Floor Finish
VENDOR: NCL
24/7® is a new, highly advanced floor finish with superior “off-the-mop” initial gloss. This ultra-high solids formula provides exceptional film clarity, repels soil and scratches, and extends the time between stripping cycles from 18 to 36 months. A wet-look gloss...
SKU: ncl-bare-bones-1
PRODUCT TYPE: Stripper
VENDOR: NCL
A 55% active speed stripper that easily cuts through multi-layers of burnished floor finish. This “true” no-rinse stripper does not contain potassium hydroxide or sodium hydroxide yet is the fastest working liquefier on the market. Low foaming, no scrub and...
SKU: ncl-brite-eyes-1
PRODUCT TYPE: Floor Finish
VENDOR: NCL
An instant deep wet look thermoplastic floor finish which can be high speed burnished or maintained with conventional methods. This unique premium grade floor finish is manufactured in high pressure reactors using integrated latex and oligomeric polymer emulsions chemically combined...
SKU: ncl-cyclone-1
PRODUCT TYPE: Grout Cleaner
VENDOR: NCL
A heavy duty alkaline cleaner for removal of ingrained dirt, oil, grease and wax on all ceramic tile, porcelain tile and grout surfaces. CYCLONE™ is also a very effective grout cleaner for all polished and non-polished ceramic, porcelain and stone...
SKU: ncl-diamond-gloss-1
PRODUCT TYPE: Stone Rejuvenator
VENDOR: NCL
DIAMOND GLOSS™ is the second step of a synergistic two step polishing and maintenance program for terrazzo and natural stone. DIAMOND GLOSS™ works to produce a super tough, super high gloss on all natural surfaces. Creates maximum gloss on terrazzo, marble...
